Alpha Technologies IP Bell - 02C Provozní pokyny stáhnout pdf (Strana 18)

IPDP - installation and operating instructions

3 Programming of Parameters

3.1 Basic VoIP settings

3.1.1 Choosing a mode and login

Very important is select firstly mode of IPDP in which will work inside IP

network. It is P2P (peer to peer) or IPDP is registrated to SIP server. It is

selected by DIP switch 2 – picture 7. The mode you cant change from WEB

interface. The change of DIP switch is performed always after restart. Other

switches are in position „on“ (normal). The IPDP we switch on and wait cca 1

min for unit start up.

Default setting which makes erasing of

preprogrammed parametres values is perform by

DIP switch 3 – which put to position off. Then make

restart of unit. After unit start up you must return DIP

switch 3 to position ON .

Setting of basic IP address 192.168.1.250

make by DIP switch 4 move to the position off and

restart the doorphone. After unit restart you must

return the DIP switch 4 to the position On.

The Doorphone Restart you can

make by 2 ways – either by

disconnection and connection of power

or by clicking on „Restart“ in WEB

interface .

IP address of doorphone is from the manufacturer (as well as default)

setting on 192.168.1.250. When you are in different IP network numbering

(= NOT START 192.168.1.xxx) then you have to programm in features of

TCP/IP protocol at your PC either temporare IP adress or as alternative

configuration for example: 192.168.1.245 . Then you can programm Door

phones parametres including IP adress and after restart of unit you can be

connected to WEB interface of door phone at new IP adress.

CAUTION: DIP switch 3 and 4 must be in position "on" otherwise after restart

new IP adress will be rewritten back to default IP adress = 192.168.1.250.

In your web browser enter IP address of the DoorPhone, default is

192.168.1.250. See picture 8.

Picture 7 DIP switch setting

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 42 43

Žádné komentáře

Alpha Technologies IP Bell - 02C Provozní pokyny Strana 18