Alpha Technologies IP Bell - 02C Provozní pokyny stáhnout pdf (Strana 37)

IPDP - installation and operating instructions

3.2.3 Time Parameters

After making changes do not forget click on „save changes“ button

1. max. time of call duration. It might be prolong by dialling characters

(* or #) from phone. (page 33.).

2. Number of incoming call rings before picks up. Adjustable from 1 to 9. After

detection of first ring starts flashing LED on front panel. After

preprogrammed number of rings the unit automatically picks up.

3. max. time [sec] between button presses [from 1-9]

- relay closing – when time between presses of 2 following buttons is

longer then code for relay activation is not evaluated correctly.

- Number dial – when first button we press is also first digit in code for

relay activation from door phone then dial of number is delayed

about this time.

4. time [sec] for which door phone hang up before REDIAL (button press

during communication, busy tone detection), [from 1-5]

5. After dial is finished waiting this time. When this time is over and

communication wasn’t established or the line is busy the IPDP hangs up

[from 04-99]. The dial is repated when you use mode of 2 groups of

numbers..

6. In factory setting is acoustically signalling what is processed by door phone.

If signalling makes you a problem you can switch it Off.

7. Default – factory setting. After making changes click on button „ save

changes

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 43

Žádné komentáře

Alpha Technologies IP Bell - 02C Provozní pokyny Strana 37