
52
Fiber Power Systems
FlexPoint 1230 Series
Models: Description
FP1230-01-A: 120Vac 3-Conductor NEMA 5-15 Power Cord
FP1230F-01A:
120Vac 3-Conductor NEMA 5-15 Power Cord
F Connector
FP1230-02-B: 240Vac 3-Conductor Schuko Input Power Cord
FP1230-02-C:
240Vac 3-Conductor United Kingdom Input
Power Cord
FP1230-02-D:
240Vac 3-Conductor Australia/New Zealand
Input Power Cord
Input OPS
AC Input Voltage: 120Vac or 240Vac
AC Input Frequency: 50/60Hz
Surge Protection:
ANSI/IEEE Std. C62.41 to Category A, B
or C requirements, using a “Ring Wave” or
“Combination” waveform, at a level of 6kV
Output
Operational Output Power:
30W max. continuous
(ONT load + battery charge + heater)
Output Voltage: 12Vdc Nominal (Battery voltage upon loss of AC)
Output Power Loading:
Following GR-909 telephone lines in various
states, e.g., ringing, off-hook, on-hook, data, and
video operation requirements
Auxiliary Input Voltage: 10.5 to 15.5Vdc
Mechanical
Housing Size H x W x D (in/mm): 7.75 x 8.75 x 3 / 177 x 224 x 76.2
Weight (lb/kg): 3 / 1.4
Battery 7.2AH (lb/kg): 5.7 / 2.6
Battery 12AH (lb/kg): 8.4 / 3.8
Battery
Battery Type:
Maintenance free, leak-proof, sealed VRLA
(valve regulated lead acid)
Visual Indicators
System: Green LED
Power is available at the output
(AC, battery or auxiliary)
Battery:
Green LED
Battery discharging to 25% SOC
(main or auxiliary)
Green Flash Battery at 25% SOC
Replace Battery: Red LED Battery not present or failed self test
Auxiliary Power Source: Green LED
Valid auxiliary power source
connected
Audible Status Indicators
Loss of Input Power: Single, one second chirp
Low Battery: Single chirp every 15 seconds at 25% SOC
Replace Battery: Double chirp every fifteen minutes
Push Buttons
Silence Alarm: Suppresses the audible alarm for 24 hours
Battery Emergency Use: Accesses reserve battery capacity
Agency Compliance
System:
FCC part 15 Class B, CSA-NRTL\C (CSA60950),
CE, C-Tick, RoHS to EU 2002/95/EC, Seismic
Zone 4 rated per GR-63
Environment
Storage Temperature: -40 to 46°C / -40 to 115°F
Operating Temperature:
Without Heater: -20 to 46°C / -4 to 115°F
With Heater: -30 to 46°C / -22 to 115°F
Note: Operating temperatures based on AX-LONGBAT-7.
Humidity: 0 to 95% non-condensing
Elevation Operation Max.:
3000m / 10000ft derate at 2°C / 3.6°F
per 1000ft above 6000ft
Elevation Storage Max.: 15000m / 50000ft
Interface
DC Output and Alarm:
Removable Screw Terminal Plug accepts seven
(2) 16AWG and (7) 24AWG wires or COAX F-style
Auxiliary DC Input:
3.5mm (OD), 1.3mm (Pin, positive)
coaxial barrel connector
AC Input: IEC320/C6 Receptacle
Line Cord: NEMA 1-15 to IEC 320 C5 (Other cords available)
Warranty
FlexPoint 1230: 3 years repair or replace
Batteries Available: 1 year or 3 year
Supporting Options
AX-STDBAT-7 — Battery 7.2AH AGM, 1 year warranty
AX-LONGBAT-7 — Battery 7.2AH AGM, 3 year warranty
AX-STDBAT-12 — Battery 12AH AGM, 1 year Warranty
FP1230-CVR — FlexPoint 1230 12AH battery cover with strap
FP1230-HK — FlexPoint 1230 heater Kit
FTTH-CBL — ONT hook-up cable, 2x16AWG and 5x24AWG, CMX UL listed
AUX-CBL — Cable, auxiliary power plug 3m Long
Shown with cover
removed, battery,
auxiliary power cable
and ONT hook-up cable
Connector interface
options and cable
strain relief
COAX F-style Interface
FlexPoint 1230 Series
> Telecommunications grade power system provides 30W
of 12Vdc power for FTTx and RFoG applications
> Coax F-style and PacketCable™ interface options
> Emergency battery reserve for greater E911 availability
> Battery management system provides optimum
service life and runtime
> Local visual and audible status indicators and
remote alarm interface
FlexPoint
™
1230 Series
Indoor 12Vdc 30W UPS
Komentáře k této Příručce